Canon Pixma MP230 full driver
The Canon Pixma MP230 is an all-in-one printer that measures 44x32x12cm when closed. Put A4 paper in the rear tray, and the height of 12 cm becomes 32 cm and the depth of 32 cm becomes 38 cm. This unit does not have a paper exit door to open and the exit is delivered face-up from the front base of the unit. This is a two-cartridge, four-color unit, changing the ink is simple and easy, just hold the top of the unit and the open area above the paper outlet and lift it up to expose the printer carriage switch and cartridges will be visible. All controls are on the upper-right edge, it consists of a total of four touch buttons and a similar number of LEDs. There are five options in the print menu: Standard, Photo Printing, Business Documents, Save Paper, and Envelopes. Additional options depend on the mode you are in, but items such as Duplex (manual), Quick Print, and Grayscale are typically available. The basic print qualities are Standard, Tall, and Fast. Other options, such as paper size, etc. they are also normally available. It is now possible when printing to achieve stated speeds as all manufacturers must use the same sheets to produce timings so that you no longer see unsupported claims of 30 PPM etc. my own documents and printing the absurd document 200 words “x” times in “fast” mode comes out at 9.5 ppm. Printing the most typical 1,500-word document on four pages costs 8 ppm. As always, the first and last pages are not counted in giving print times, but when you look at the speeds claimed on Canon’s site, the second link, my numbers now look remarkably similar. Printing one borderless A4 image or four 15 x 10 cm images on a single sheet of photo paper takes 222 seconds. Copying is the only thing that can be done without the PC being turned on or even connected, a color copy takes 30 seconds and a monochrome copy 15 seconds. The quality was excellent, but the lack of a screen means that there is also a lack of choice, for example, no reduction or enlargement of the image is available. Unless you scan a lot, I suggest that the software provided by Canon Quick Menu will do what you need, there is a fully automated mode that only requires you to place the item to be scanned face down on the platen. . Scanning an image with these settings takes about 30 seconds, and if you want to send it by email, just check one box and it will open in your email package with the attachment ready to be attached. that the recipient can indicate. Canon used to litter your desktop with a lot of icons, now it’s just two the manual and Canon’s quick menu, the latter allows you to open everything else from inside, by default this will load when you start, but you can stop this if you only use it occasionally and increase the startup time, double click it a few minutes before wanting to use it.
How to download and install Canon Pixma MP230 driver
Download Canon Pixma MP230 drivers and software from its series directly in the download section. It is important to follow any steps of the installation process to make sure that the drivers and software are successfully installed.
Previous series: Canon Pixma MP210 printer drivers
Download Canon Pixma MP230 driver
These files of the Canon Pixma MP230 driver series both for Windows and Mac can be downloaded for free.
Download Canon Pixma MP230 series drivers and software for Windows
Download Canon Pixma MP230 series drivers and software for Mac
How to install Canon MP230 driver for Windows
- Click the Download button for Windows to download the file.
- Double-click at the .exe file that is been downloaded.
- Follow the instructions to install the drivers.
How to install Canon Pixma MP230 Driver for Mac
- Click the Download button to download the file.
- Double-click at the downloaded file.
- Double-click at the Disk Image.
- Double-click at the “Setup” file then follows the instructions on the screen, this driver installation will connect automatically to your Canon Pixma MP230 driver printer.